Honda Miimo HRM310 Robotic Lawnmower

The Miimo HRM310 robot mower from Honda will give you a perfectly cut lawn to enjoy all season, without you having to lift a finger. Suitable for lawns up to 1,500m², the HRM310 can handle slopes up to 24°/45%.

Navigating your garden without any issues, the HRM310 follows the layout of your garden and avoids any obstacles in order to provide an even cut that’s easy on the eye. The fine grass clippings are recycled back into the ground to act as a mulch to further boost the health of your lawn.

Whether rain or shine, the robust Miimo HRM310 will continue cutting in any weather, and it’s so quiet at just 61dB(A) that it can even cut at night without disturbing you or your neighbours.

Miimo HRM310 can be protected by a security code which ensures nobody else can use it other than you. When Miimo is lifted it sounds an alarm and will only continue mowing when the correct security code is entered into the control panel on the top.

Little effort, full control

You will have complete control over the times that your Miimo operates. Maybe you don’t want the mower cutting at night or when your children want to play on the lawn. No problem, just set the operating times accordingly. If you prefer night time cutting, that’s fine too.

Zone management gives you the control over when and where the HRM310 mows, meaning you can ensure harder to reach areas, such as down narrow passages, are always covered.

Healthier lawn

Because robotic mowers cut the grass regularly, the grass clippings are tiny. The grass hardly has time to grow before it is being cut again so the grass is less stressed by the cutting and the tiny clippings just disappear back into your lawn. Less stress and free nutrients make for a greener and healthier lawn.

The boundary wire keeps the mower on your lawn. When the mower approaches the boundary it will sense the wire and turn back towards your lawn to continue cutting. Thanks to the way the cutting pattern works, all of the grass gets cut, even tight corners, and there are no wheel markings left in the lawn.

Installing the Miimo HRM310

Installation in your garden is very simple using the Set-Up Wizard which guides you through the set-up process. Once mowing is underway, the battery charge is monitored and when the battery is running low, the Miimo HRM310 will automatically return to its docking station to recharge. When charging is complete, the mower returns to work.

Part of the installation process is to lay a boundary wire around the perimeter of your lawn and around any internal obstacles such as flower beds or a pond. You can either bury the boundary wire or peg it to the surface of the lawn. If pegged to the surface, the grass will soon grow around the wire and it will disappear from sight. If there are any obstacles that the mower can cut right up to (trees for example), just ignore them when laying the boundary wire because the mower will easily negotiate the obstacle to continue mowing. Boundary wire and pegs are sold separately. 

We also offer an installation service should you require.